BaSS SPEaKER 12" HEaVY DuTY 30HAP-HD PmR BaSS SPEAKER HD hotsell ENoUGH FoR aLL APPLiCATIONS

(((((((. see my other listings))))))

Some people say you can't get powerful bass out of a 12" size... I Call BS..

This posting is for a single PMR MODEL 30 PAP-HD bass guitar driver. These work really well as woofers in PA and automotive systems ..

....They work especially good in small bass enclosure styles, like tapped bass horns, CUBO models, and all sorts of scoops, because of that massive magnet, a large diameter coil, and a high bL number..
.
Here's a few specs

*Diameter-
12 1/4"

*Mounting hole cut out- 11"
*Over all depth- 5.75"
*Power- 350 watts RMS CONTINUOUS CONSERVATIVELY ( I run these @ 500 all the time).....---- 700 watts normal music program,---- 495watts peak power, ------ 990watts peak-to-peak power, or------ 3,000 Chinese watts ((( hotsell heeeeheeeeeeeee)))_

*Magnet Diameter- 7"....
* Weight- I'll guess around 15 pounds

*Fs- 32 Hz
*Upper usable response BEFORE "roll off"-4.3KHz Usable to 6KHz
* Impedance- 8 Ohms
*Sensitivity- 96.5 (+ 1.5dB@ 120-500Hz)
*XMAX- 10MM
*VAs- 4.88 Cu. FT
*QTs- .400
* Magnet Weight- 88 Ounce! (just the magnet, not the iron!)
*Motor weight-13 pounds
*Cone- Pulp composite, with fiber glass and hemp fiber formulation
*Dust Cap- re-pressed pulp
*Cone Shape- curve-linear
*Dust cap- re-pressed pulp
* Spider assembly. FLAT profile/ high compliance treated textile
*Frame- ALUMINUM
* Surround- Sealed and treated cloth/ accordion profile
*Front Mounting gasket- yes
*Hook- Up- heavy duty 12- 22 gauge spring loaded bare wire terminals
* polarity indicated- YES
*Litz wires- .055" diameter woven conductors
*Voice coil is radially vented/CCAW wire wound high temp/power design


That'll give you guys a good idea what these monsters are. You know what this stuff is, and how she'll operate..Once you hold one in-hand, you'll see what I'm getting at....

The thing I noticed about them is that for a 12", they have THICK, quick, immediate responding low end, with a seemingly instantaneous transient capability. They dig LOW and play LOUD, without coloration and distortion. They're MADE to do this..

.......The lower midrange is actually decent. You don't have the "eye squint" tonality... There's no "Gray Area" in the lower mid bass area like most speaker posses.Seemingly NO coloration with these units....

...... Going into the midrange, it's really good actually, very detailed, no "bell", or ringing, with a clear, dampened, separated, almost 3D presentation, without the usual "beaming" sound/tonality...Over all, a well balanced, well behaved, " steerable" speaker, that you can make it do what YOU want it to do..

I know I'm the one selling them, but fellas', these really are (R!) That good!
.....Put 2 of them , 4 of them , heck, build a "Lemmie' Stack" ( eight speakers) with 2- 4x12 enclosures and a Marshall head, and see what she does...
....You'll crush flies out of the air.....Great even in singles use, the PMR. 30PAP-HD is the best dollar-for-dollar speaker in this class at this pricing rage , even doubled..

So, if you have a budget, and STILL have to have high quality, highly detailed, high OUTPUT bass from a 12", well, here ya' go!!!

ANY questions or concerns, just ask
THANKS GUYS!!!
--Jason Tice/ PMR