Hexton Hills (New and Improved!) Tiles (75% Scale) | Silver Tier | 65 hotsell Tiles

***New Announcement!***

You can now use a special app to build your perfect fantasy world using Hexton Hills tiles and then save a list of the tiles that you need printing. Try it, it's free!

https://map.gravenguild.com/

***********************************************************
Size Options:
We get asked a lot about our unusual size options. Essentially we increase the size of a lot of our models in line with the size of the base increasing. So a figure with a 25mm base would be half the size of that same figure on a 50mm base. However, we are very happy to print the figures to be either slightly larger or smaller to fit with the height you need for your preferred system. All you need to do is let us know what height you want and pick a base size that is appropriate and we'll do our best to meet your requirements. If in doubt about anything at all just send us a message, we're happy to be precise so that you can purchase with confidence.

Realmshapers provides freshly 3D printed resin models in a neutral grey colour. If you are new to resin models you need to understand that you will need to do some finishing work to get the best results - some miniatures require supports which can leave small marks on the surface which can be removed with sanding. Larger models may also be hollowed out to improve print stability and as such will have resin drainage holes that are easily fixed with pva glue or plastic putty. I try to remove as many support struts as possible but sometimes the occasional one might not be removed - they are very easy to remove with a sharp craft knife. If there are bumps on the surface they can be easily and quickly sanded hotsell down but be very careful not to breathe in resin dust. If the model is glossy and hard it can be made matt with a stiff nylon brush (or carefully applied steel wire wool) or the glossiness can be removed by priming. In the unlikely event that a model is still sticky the best approach is to expose the model to direct sunlight and wash your hands with plenty of soap (resin is a skin irritant if left for long enough on skin). If you need any other advice on how to work with the model or have a problem I'm always happy to help out via Etsy messages.

This listing is for the 75% scaled version of the Hexton Hills Silver Tier set.

This Silver Tier contains 65 Tiles including the following:

2 Fort Tile
2 Town Tile
2 Village Tile
6 Hill Tiles
6 Plain/Grassland Tiles
14 River Tiles
8 Forest Tiles
15 Road Tiles
10 Mountain Tiles

More tiles can be purchased from this store individually and added to this order to boost this map set or fulfill specific scenario elements.


Realm Shapers is a licensed producer of resin prints for the Hexton Hills campaign. Each tile is designed to fit snugly into it's neighbour so that a map can be easily assembled and then disassembled for new maps and adventures. All tiles are printed with a Z axis height of 20 microns for maximum detail - half size tiles may not contain all the details of full sized tiles. Tiles may be slightly pitted on the underside where supports struts were connected. All tiles are printed in a high quality neutral grey resin. Tile designs are the property of the Graven Guild.

Kickstarter Link: https://www.kickstarter.com/projects/gravenguild/hexton-hills-tabletop-campaign-map-tiles?ref=ksr_email_user_watched_project_launched

Size Options available through other listings:

Full Size Hexton Hills (100% Scale) (65mm from tip to tip of locking mechanism)
65mm (Width) x 62.35mm (Length)

Three Quarter Size Hexton Hills (75% Scale) (47mm from tip to tip of locking mechanism)
46.76mm (Width) x 48.75mm (Length)

Half Size Hexton Hills (50% Scale) (32.5mm from tip to tip of locking mechanism)
32.50mm (Width) x 31.17mm (Length)

Other sizes available on request.